Planet GS-4210-24P2S 24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch

Physical Port

• 24-port 10/100/1000BASE-T Gigabit RJ45 copper
• 2 100/1000BASE-X mini-GBIC/SFP slots
• RJ45 console interface for switch basic management and setup
• Reset button for system factory default and reboot

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• 9K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Power over Ethernet

• • Complies with IEEE 802.3at High Power over Ethernet
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE Management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE Port Power feeding priority

– Per PoE port power limitation

– PoE delay

• – PD classification detection
  • Intelligent PoE features

– PoE usage threshold control

– PD alive check

– PoE schedule

Layer 2 Features

• • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN

– IEEE 802.1Q tagged VLAN

– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

– Protocol VLAN- Voice VLAN

– Private VLAN

– Management VLAN

• – GVRP
  • Supports Spanning Tree Protocol

– STP (Spanning Tree Protocol)

– RSTP (Rapid Spanning Tree Protocol)

– MSTP (Multiple Spanning Tree Protocol)

• – STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation

– IEEE 802.3ad Link Aggregation Control Protocol (LACP)

– 1 LACP group, up to 2 ports per LACP group

– Cisco ether-channel (static trunk)

– 1 trunk group, up to 2 ports per trunk group
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops

Quality of Service

• • Ingress/Egress Rate Limit per port bandwidth control
  • Storm Control support

– Broadcast/unknown unicast/unknown multicast

• • Traffic classification

– IEEE 802.1p CoS

– TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IPv4 IGMP snooping v2 and v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port filtering
• MLD snooping port filtering

Security

• • Authentication

– IEEE 802.1X port-based network access authentication

– Built-in RADIUS client to co-operate with the RADIUS servers

– DHCP Option 82

• – RADIUS/TACACS+ login user access authentication
  • Access Control List

– IPv4/IPv6 IP-based ACL

– IPv4/IPv6 IP-based ACE

– MAC-based ACL

• – MAC-based ACE
  • MAC Security

– Static MAC

– MAC Filtering
• Port security for source MAC address entries filtering
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP source guard prevents IP spoofing attacks
• DoS attack prevention
• SSH/SSL

Management

• • IPv4 and IPv6 dual stack management
  • Switch management interface

– Web switch management

– Telnet command line interface

– SNMP v1, v2c and v3

• – SSH and SSL secure access
  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance

– Firmware upload/download via HTTP/TFTP

– Configuration upload/download through web interface

– Dual images

– Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Cable diagnostics
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• SNMP trap for interface link up and link down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET smart discovery utility

*see specification tab for other details